Piller Corner Guard

ARPITHA RUBBER COLUMN GUARD

• Rubber Column Guard product is to protect the column in Car Parking.
• Provided to prevent damages to the cars.
• Clear visibility of the column guards, due to 5 numbers of bright yellow radium stickers.
• 100 MM X 100 MM with curved corner and length 1000 mm and thickness 20mm.

METHODOLOGY

• This is a Ready to use directly' product. Therefore, fixing is very simple.
• Mark the location at which the product has to be fixed through the holes provided on the Rubber Column Guard, leaving 1 feet from the floor level.
• Then drill holes at all the marked location with a 6 mm drill bit for a depth of at least 40 mm.
• Insert the Plastic Gatta into the drilled holes and place the Rubber Column Guard back on the marked location.
• Affix the screws securely through the Rubber Column Guard. Paste the Arpitha' Reflective yellow sticker in the slots provided on the Rubber Column Guards.

SPECIFICATION

• 1000 mm length with curved corner and 20 mm in thickness at the center.
• Width 100 mm x 100 mm.
• 5 yellow reflecting radium stickers pasted on it at uniform intervals.